BCv2
Update your card
The latest firmware is v1.2 (0x0105004F), from Oct 17, 2026. Whats new
Firefox, Safari and every browser on iPhone and iPad don't support WebUSB. Use Chrome or Edge to update here.
Update now Beta
- With the card fully disconnected, plug the DATA port into this computer.
- Hold the BOOT button then plug a power supply into the POWER port. A moment after the card is plugged in, let go of BOOT. The card is in bootloader mode for the next 20 seconds or so, try again if the lights come on before you can update it.
- Press Update, select "Unknown device from QinHeng Electronics (WCH)", and allow your browser to connect to it. You will see the update status on this page.
First time on Linux? Chrome needs a udev rule, its under Trouble.
Getting the firmware… Keep the card plugged in.
You can use a phone with USB C to power the card, and another to update it.
Update with your Android phone
Scan this with your phone or open anasmalas.com/bcv2/update in Chrome on it. The update runs right in the browser, nothing to install.
Install the driver
The browser needs the WinUSB driver for the card's bootloader. You only do this once:
- Put the card in bootloader mode (step 2) and open Zadig.
- Pick the device whose USB ID reads 4348 55E0 (or 1A86 55E0). It may be called "USB Module" or "Unknown Device". Not listed? Options > List All Devices.
- Leave the driver on WinUSB and click Install Driver (or Replace Driver).
- Put the card back in bootloader mode and press Update again.
Only change that one device. If you used WCHISPTool, it will need its own driver back.
Download the flash script Beta
Get the Windows flasher, right click it and pick "Run with PowerShell" (on Windows 11 it might be under "Show more options"). It walks you through the driver the first time, then flashes every card you plug in.
Use a Mac or an Android phone
iPhones and iPads cant update the card, Apple doesnt let websites talk to USB. Open anasmalas.com/bcv2/update in Chrome on a Mac or an Android phone and it does it right there.
Open this page in Chrome or Edge
This browser cant talk to USB devices, so it cant update the card. No Chrome? The easy flasher under Other ways works too.
Other ways to update
Chrome or Edge Beta
Try updating on this page first. If the browser can't open the card, Windows needs a driver for it, which the easy flasher installs the first time it runs.
Easy flasher Beta
Downloads the flashing tool and the firmware, then flashes every card you plug in. The window goes green when it's done.
Download bcv2-flasher.ps1, right click it and pick "Run with PowerShell" (on Windows 11 it might be under "Show more options"). The first time, it walks you through Zadig to install the driver.
Chrome or Edge Beta
Update right on this page, nothing to install.
Easy flasher Beta
Downloads the flashing tool and the firmware, then flashes every card you plug in. Open Terminal and run these:
cd ~/Downloads
curl -fLO https://anasmalas.com/bcv2/flash/bcv2-flasher.sh
bash bcv2-flasher.sh
Chrome or Edge Beta
Works on this page once Chrome can use the card: add the udev rule under Trouble first.
Easy flasher Beta
Downloads the flashing tool and the firmware, then flashes every card you plug in. Open a terminal and run these:
cd ~/Downloads
curl -fLO https://anasmalas.com/bcv2/flash/bcv2-flasher.sh
bash bcv2-flasher.sh
Chrome Beta
Update right on this page, nothing to install.
Chrome
Open anasmalas.com/bcv2/update in Chrome on your phone and plug the card's DATA port into it. The update runs right in the browser, nothing to install.
Do it yourself
- Download the latest firmware.
- Get a flashing tool: WCHISPTool on Windows, or wchisp on Mac and Linux.
- Plug DATA into your computer, hold BOOT, plug a charger into POWER and let go.
- In WCHISPTool pick CH32X035, choose the file and press Download. With wchisp, run
wchisp flashwith the file.
Heads up, on Windows WCHISPTool uses a different driver than the browser and the easy flasher, so stick to one.
Is it safe?
The card's bootloader lives in its own memory that an update cant touch, so if anything goes wrong just put it back in bootloader mode and try again.
The browser can only talk to the card you pick in the list. The firmware is checked against its SHA-256 before it gets written.
The easy flashers are short plain scripts, read them or ask your friendly LLM to review. They only download wchisp v0.3.0 from its GitHub page and the firmware from this site, and check both against fixed SHA-256 hashes. No admin needed, except the Linux udev rule, and on Windows the Microsoft C++ runtime and the driver if you dont have them yet.
All of it is on GitHub.
Trouble?
Card not in the list, or the display came on? It didnt go into the bootloader. Unplug POWER, hold BOOT a bit harder and plug it back in.
Windows: the browser needs a driver for the card. Run the Windows flasher once and it sets it up with Zadig, or just use your phone.
Linux: Chrome needs a udev rule to use the card. Run this once, then unplug POWER and plug it back in with BOOT held:
sudo tee /etc/udev/rules.d/60-bcv2-wchisp.rules <<'EOF'
SUBSYSTEM=="usb", ATTRS{idVendor}=="4348", ATTRS{idProduct}=="55e0", TAG+="uaccess"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55e0", TAG+="uaccess"
EOF
sudo udevadm control --reload-rules && sudo udevadm trigger
Stopped partway? Nothing is broken. Put it back in bootloader mode and update again.
To get an email for new firmware, watch the BCv2 releases on GitHub (Watch > Custom > Releases), or use the feed.